• +86 18933977964
  • Carrie's Skype : carrie.sanway
Email:sales2@china-sanway.com Sanway Professional Audio Equipment Co.,Ltd

Sanway Professional Audio Equipment Co.,Ltd

Sanway LA208A Powered Line Array System

1. dual 8 inch powered top speaker 2. powered single 18 inch subwoofer 3. adapted neodymium drivers and woofer 4. lightweight and compact birchwood enclosure 5. Both of LA208 active and LA18S active are powered by Sanway D1S-800D dsp active module.

Chat Now
Product Details

Sanway LA208A powered line array system

Overview:

The LA208 active line array system features with two 8 inch neodymium low frequency drivers and one 3 inch neodymium drivers in a compact birch-wood enclosure.  With a high SPL 140dB, small size and lightweight, it is full configurable to match middle size in door or out door event. 

To make a complete line array speaker system, we have LA18S to couple with LA208. This is a single 18 inch subwoofer. The inside 18 inch neodymium subwoofer with dual bass-reflex tuned enclosure, could deliver loud and efficient 138dB/m very high sensitivity.

As a sound system we can run 3 units top speaker and one LA18S subwoofer loudspeaker per side.

Application: 

A. Music playback and sound reinforcement in MID-size venues

B. Entertainers, corporate A/V professionals and sound system rental companies

C. Permanent Installation

Specification: 

LA208A active

Usable   bandwidth (-10dB)

55 Hz - 20 kHz

Nominal   directivity (-6dB)

Horizontal 110° symmetric

Vertical: Dependent upon number of elements

 and line source curvature

Maximum SPL1

141 dB

RMS handling   capacity

LF: 450 W HF: 80 W

Components LF: 2 x 8’’ neodymium weather-resistant

 HF: 1 x 3’’ neodymium   diaphragm compression driver

Nominal impedance: LF = 8 ohms, HF = 8 ohms

Dimension (W x H/h x D)

730 x 250/164 x 482

 27.7 x 9.8/6.4 x 19 in

Weight (net)

26 kg 57.2 lbs                                       

Connectors

2 x 4 Neutrik

Material

 birch plywood

LA18S

Low frequency limit (-10dB)

32 Hz 

Maximum SPL1

138 dB

RMS handling   capacity

700W

Components LF: 1 x18" neodymium woofer

Nominal impedance:  8 ohms

Dimension (W x H/h x D)

750 x 540 x 707mm

 29.5 x 21.3 x 27.8 in

Weight (net)

52 kg                           

Connectors

2 x 4 Neutrik

Material

 birch plywood

D1S-800D DSP active module: 

Frequency Response20Hz-20KHz ±1dB
THD+N 1 KHz 1W 8&Omega;<0.1 %
Signal to Noise Ratio   1KHz>100dB
Channel Separation   1KHz>80dB
Cl assD
ProtectionShort,DCP,OVP,UVP,OCP,OTP
Operating Voltage90V-135V  / 180V- 265V
Input Sensitivity0.77V
Input  Impedance20K&Omega;
DSP Fuction

MUTE,Polarity,Gain,Delay,

Limiter,Mixer,EQ,XOver

DSP ControlUSB and RS-485

Pictures of LA208A and LA18S:

LA208A powered line array system 2 LA208A powered line array system 3

LA208A powered line array system 1 LA208A powered line array system 4

Hot Tags: sanway la208a powered line array system, China, factory, manufacturers, quotation, price list
Related Products
Copyright © Sanway Professional Audio Equipment Co.,Ltd. All Rights Reserved.
QR Code